"Introducing Shape-Shifting Feet!"
Pull harder with greater confidence--without creating the two side dents that most PDR techs have experienced on curved panels.
The Problem
Any PDR tech who has spent time glue-pulling dents with a traditional mini-lifter knows one of its biggest drawbacks. When the glue tab pulls upward, the lifter's feet push downward with equal force. On curved panels—such as roof rails, quarter panels, and body lines—that downward pressure is concentrated on two small, flat feet, making it easy to create two new dents on either side of the dent being repaired.
The reason is simple: conventional mini-lifter feet concentrate all of the downward force into an area of about one inch. The smaller the contact area, the greater the pressure on the panel.
The Solution
Our innovative Shape-Shifting Feet™ solve this problem by spreading that force across a much larger contact area—up to three inches. By distributing the load over a wider surface, they dramatically reduce the concentrated pressure that can cause unwanted dents while providing a more stable pull.
The Shape-Shifting Feet™ also swivel to match the contour of curved panels and slide horizontally for fast positioning and precise alignment with the glue tab. The result is safer, more controlled pulls with less risk of damaging the surrounding panel, giving technicians greater confidence when pulling on difficult curved surfaces.
